oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 813-sl70.0m-16 70.0 mhz if saw filter 15.45 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 813-sl70.0m-16 january 2011 rev a 70.0 mhz if saw filter 15.45 mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, d, f, g, h, i, j, l ground k input e output test fixture & values input l1=220nh q > 40 output l2=220nh q > 40 source/load impedance 50 ?
oscilent part number 813-sl70.0m-16 january 2011 rev a 70.0 mhz if saw filter 15.45 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -30 - 80 storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz 69.8 70.0 70.2 insertion loss at fo db - 12.2 13.2 temperature coefficient ppm/c - -84 - amplitude ripple variation at fo 7.0 mhz db p-p - 0.5 1.0 group delay variation at fo 7.0 mhz nsec - 50 80 absolute delay at fo sec - 0.88 - in/out return loss at fo db - - - bandwidth at ?1.0 db mhz 15.2 15.45 - bandwidth at ?3.0 db mhz 16.0 16.42 - bandwidth at ?40.0 db mhz - 20.17 21.0 relative attenuation: from 10 to 59.5 mhz db 40 43 - from 82 to 140 mhz db 40 43 -
oscilent part number 813-sl70.0m-16 january 2011 rev a 70.0 mhz if saw filter 15.45 mhz bandwidth product specification p. 3 www.oscilent.com frequency response
|